Full display

  • Abstract:
    This part of IEC 62040 is a type test product standard for electromagnetic compatibility (EMC) and applies to movable, stationary, fixed or built-in, pluggable and permanently connected UPS for use in low-voltage distribution systems with an environment being either residential, commercial, light industrial or industrial, which deliver output voltage with port voltages not exceeding 1500 V DC or 1000 V AC and which include an energy storage device. Subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer, this standard defines emission limits, immunity levels, test methods and performance criteria for a complete UPS to comply with the essential EMC requirements necessary to avoid the UPS interfering with other apparatus, e. g. radio receivers, and to avoid the UPS being affected by external phenomena. This standard does not address EMC phenomena produced by loads connected to the UPS or situations created by any apparatus external to the UPS other than as described in the immunity requirements. This standard is harmonized with applicable IEC standards for electromagnetic emission limits and immunity levels. It contains additional requirements applicable to UPS. This standard does not cover: a) low-voltage DC power supply devices covered by IEC 61204 standards; b) systems wherein the output voltage is derived from a rotating machine. NOTE 1 UPS generally connect to their energy storage device through a DC link. A chemical battery is an example of an energy storage device. Alternative devices can be suitable, and as such, where "battery" appears in the text of this standard, this can be understood as "energy storage device". NOTE 2 This type test-based product standard allows EMC conformity assessment of UPS included in one of categories C1, C2 and C3 before placing them on the market. It also provides guidance for conformity assessment of UPS included in category C4 (see Clause 4). NOTE 3 The differing test conditions necessary to encompass the range of physical sizes and power ratings of a complete UPS are taken into account. A complete UPS can consist of one or more interconnected units. For UPS configuration details refer to IEC 62040-3:2011, Annex A. NOTE 4 The requirements have been selected so as to permit an adequate level of EMC for UPS installed in residential, commercial, light industrial and industrial locations. The requirements are not always sufficient to cover situations with low probability of occurrence including UPS faults.
  • Document number:
    IEC 62040-2
  • Issuing date:
    2016-11-01
  • Document type:
    Norm
  • Title:
    Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
  • Replaces:
    IEC 22H/210/FDIS(2016-09); IEC 62040-2(2005-10); IEC 62040-2 Corrigendum 1(2011-11)
  • Author:
    IEC/SC 22H Uninterruptible power systems (UPS)
  • Search term:
    Alternating current; Batteries; Components; Conduits; Connections; Control; Converters; Definitions; Design; Dimensioning; Discharge; Earthing connection; Electric convertors; Electric mains; Electric power systems; Electrical components; Electrical engineering; Electrical hazards; Electrical safety; Electrically-operated devices; Electromagnetic compatibility; Electromagnetism; Electronic engineering; Electronic equipment and components; Electrostatics; EMC; Enclosures; Environmental condition; Equipment; Field strength (electric); Frequency ranges; Grids; Impulse voltages; Influence quantities; Inspection; Installations; Interference rejections; Interferences; Interfering emissions; Limits (mathematics); Low frequencies; Magnetic; Measurement; Measuring techniques; Media ports; Noise power; Operating conditions; Operating mode; Operation; Performance; Ports (openings); Power electronics; Radiation; Radio disturbances; Radio interferences; Receivers; Redundancy; Safety; Signals; Specification (approval); Testing; Uninterruptable; Uninterruptible power systems; Vibration; Voltage dips; Voltage drops
  • Application areas:
    04.15 Stromerzeugungsgeräte
  • Hazards:
    AB Terminologische Festlegungen in Normen mit Arbeitsschutzbezug; EA Elektrische Gefährdungen im Allgemeinen; GH Elektrische, magnetische und elektromagnetische Felder
  • ICS:
    17.220.01 Electricity. Magnetism. General aspects; 29.200 Rectifiers. Converters. Stabilized power supply; 33.100.01 Electromagnetic compatibility in general
  • Price:
    245,00 EUR
  • Cross references:
    CISPR 11 (2015-06)<S>; CISPR 16-1-1 (2015-09){historisch}<S>; CISPR 16-1-2 (2014-03)<S>; CISPR 16-1-4 (2010-04){historisch}<S>; CISPR 16-1-4 AMD 1 (2012-07){historisch}<S>; CISPR 16-2-1 (2014-02)<S>; CISPR 16-2-3 (2010-04){historisch}<S>; CISPR 16-2-3 AMD 1 (2010-06){historisch}<S>; CISPR 16-2-3 AMD 2 (2014-02){historisch}<S>; CISPR 22 (2008-09){historisch}<S>; IEC 61000-2-2 (2002-03)<S>; IEC 61000-3-2 (2014-05){historisch}<S>; IEC 61000-3-12 (2011-05)<S>; IEC 61000-4-2 (2008-12)<S>; IEC 61000-4-3 (2006-02){historisch}<S>; IEC 61000-4-4 (2012-04)<S>; IEC 61000-4-5 (2014-05)<S>; IEC 61000-4-6 (2013-10)<S>; IEC 61000-4-8 (2009-09)<S>; IEC 62040-3 (2011-03){historisch}<S>
  • Cited in:
    DIN EN IEC 61225 (2020-11)<GLEITEND>; DIN EN IEC 62040-2 (2019-04); DIN EN 62040-5-3 (2017-09)<GLEITEND>; DIN EN IEC 62041 (2020-11); DIN EN 62041 (2004-05)<GLEITEND>; DIN EN IEC 62282-5-100 (2019-05)<GLEITEND>; DIN EN 62920 (2018-07); DIN EN IEC 62933-5-2 (2021-11); DIN EN IEC 63044-3 (2018-04); DIN IEC/TS 62578 (2018-09); 16/30354067 DC (2016-12-23); 18/30352671 DC (2018-02-14); 18/30358711 DC (2018-11-08); 18/30365373 DC (2018-11-02); 18/30374949 DC (2018-05-31); 18/30383682 DC (2018-09-24); 19/30352697 DC (2019-01-23); 19/30370675 DC (2019-01-22); 19/30396989 DC (2019-06-03); 19/30398821 DC (2019-08-29); 19/30403594 DC (2019-10-25); 20/30396858 DC (2020-09-03); 21/30419209 DC (2021-01-22); 22/30454211 DC (2022-04-04); BS ISO/IEC 22237-3 (2021-10-21); BS EN 50600-2-2 (2019-06-19); BS EN IEC 61225 (2019-02-19); BS IEC 61892-3 (2019-05-03); BS EN IEC 62040-3 (2021-07-26); BS EN 62040-5-3 (2017-02-28); BS EN IEC 62041 (2020-02-21); BS EN IEC 62282-5-100 (2018-08-22); BS EN 62920+A11 (2017-10-24); BS EN IEC 62933-5-2 (2020-06-05); PD CLC/TR 50600-99-1 (2020-09-24); PD ISO/IEC TS 22237-3 (2018-05-16); EN IEC 61225 (2020-03)<GLEITEND>; EN IEC 62040-3 (2021-05)<STARR>; EN IEC 62282-5-100 (2018-08)<GLEITEND>; NF C19-225 (2020-03-27); NF C53-040-3 (2021-05-28); NF C53-040-5-3 (2017-03-22); NF C56-282-5-100 (2018-08-17); HD 60364-5-56 (2018-12)<GLEITEND>; IEC 60364-5-56 (2018-11)<GLEITEND>; IEC 61225 (2019-02)<GLEITEND>; IEC 61892-2 (2019-04)<GLEITEND>; IEC 61892-3 (2019-04)<GLEITEND>; IEC 62040-3 (2021-04)<STARR>; IEC 62282-5-100 (2018-04)<GLEITEND>; ISO/IEC 22237-3 (2021-10)<GLEITEND>; ISO/IEC TS 22237-3 (2018-05)<GLEITEND>; OVE EN IEC 61225 (2020-12-01); OVE EN IEC 62282-5-100 (2019-06-01); OVE EN 62040-5-3 (2017-10-01); GOST R IEC 61225 (2021)
  • Identical with:
    DIN EN IEC 62040-2(2019-04)<IDT>; AS IEC 62040.2(2019)<IDT>; BS EN 60745-2-17(2011-07-31)<IDT>; BS EN IEC 62040-2(2018-09-18)<IDT>; DS/EN IEC 62040-2(2018-09-12)<IDT>; EN IEC 62040-2(2018-09)<IDT>; NF C53-040-2(2018-09-07)<IDT>; JIS C 4411-2(2019-03-20)<MOD>; SN EN IEC 62040-2(2018-09)<IDT>; OVE EN IEC 62040-2(2019-05-01)<IDT>; UNE-EN IEC 62040-2(2018-10-01)<IDT>; TS EN IEC 62040-2(2018-11-19)<IDT>
  • Update flag:
    Unchanged