Ergonomic standard
- Abstract:This part of EN 1012 is applicable to compressors having an operating pressure greater than 0,5 bar and designed to utilise all gases other than air, nitrogen or inert gases which are covered in part 1. The standard lists the significant hazards associated with compressors and specifies safety requirements applicable to the design, installation, operation, maintenance and dismantling of compressors during their foreseeable lifetime and subsequent disposal.This part of EN 1012 includes under the general term compressors, those machines which comprise;- the compressor itself- a prime mover- any component or device supplied which is necessary for safe operation of the compressor.In addition it applies to partly completed compressors having a compressor in combination with some of these components as well as compressor assemblies operating in combination.Excluded are refrigerant compressors used in refrigerating systems or heat pumps as defined in EN 378-1.
- Document number:DIN EN 1012-3
- Issuing date:2014-04-01
- Document type:Norm
- Title:Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors; German version EN 1012-3:2013
- Replaces:DIN EN 1012-3(2013-03)
- Author:Mechanical Engineering Standards Committee
- Search term:Accident prevention; CE marking; Compressors; Connections; Construction; Contact; Control systems; Definitions; Design; Drive systems; Electrostatics; Emergency shutdown; Emergency-off; Ergonomics; Failure; Gases; Hazards; Installation; Instruments; Insulations; Letterings; Maintenance; Malfunction; Measurement; Measuring techniques; Mechanical components; Mechanical engineering; Mechanical safety; Nameplates; Noise (environmental); Operating devices; Operating instructions; Operation; Pressure tests; Process gas; Protection against danger; Safety; Safety device; Safety measures; Safety of machinery; Safety regulations; Safety requirements; Signs; Specification (approval); Stability; Surfaces; Symbols; Temperature; Testing; Tightness; Transport; Use; Verification; Waste disposal
- Application areas:03.52 Verdichter, Pumpen und Kompressoren; 06.15 Stetigförderer (Pumpen, Rutschen, Bandförderer, Förderbrücken)
- Hazards:AB Terminologische Festlegungen in Normen mit Arbeitsschutzbezug; BA Biologische Gefährdungen im Allgemeinen; CA Chemische Gefährdungen im Allgemeinen; DA Mechanische Gefährdungen im Allgemeinen; EA Elektrische Gefährdungen im Allgemeinen; EB Berühren spannungsführender oder leitfähiger Teile; GA Gefährdungen durch physikalische Einwirkungen im Allgemeinen; GC Schall (Lärm); GL Kontakt mit heißen oder kalten Medien (Oberflächen, Umgebungen); HA Gefährdungen durch Faktoren der Arbeits- und Arbeitsplatzgestaltung im Allgemeinen; KG Belastungen durch Störung von Geräten
- ICS:23.140 Compressors and pneumatic machines; 23.160 Vacuum technology
- Price:251,30 EUR
- Cross references:EN 626-1+A1 (2008-06){historisch}<S>; EN 764-7 (2002-05)<S>; EN 953+A1 (2009-03){historisch}<S>; EN 13445-5 (2009-07){historisch}<S>; EN 60204-1 (2006-06){historisch}<S>; EN 60204-1/A1 (2009-02){historisch}<S>; EN 61310-2 (2008-01)<S>; EN 61508-1 (2010-05)<S>; EN 61508-2 (2010-05)<S>; EN ISO 2151 (2008-08)<S>; EN ISO 4413 (2010-11)<S>; EN ISO 4414 (2010-11)<S>; EN ISO 12100 (2010-11)<S>; EN ISO 13849-1 (2008-06){historisch}<S>; EN ISO 13850 (2008-06){historisch}<S>; IEC 60417-DB (2002-10)<S>; EN 837-2 (1997-03)<G>; EN 12195-1 (2010-11)<G>; EN 15198 (2007-08)<G>; EN 61508-3 (2010-05)<G>; EN 61508-4 (2010-05)<G>; EN 61508-5 (2010-05)<G>; EN 61508-6 (2010-05)<G>; EN 61508-7 (2010-05)<G>; EN ISO 4126-1 (2013-07)<G>; EN ISO 11688-1 (2009-08)<G>; EN ISO 14163 (1998-10)<G>; EN ISO 15667 (2000-05)<G>; ISO 3857-1 (1977-08)<G>; ISO 3857-2 (1977-06)<G>; ISO 8573-1 (2010-04)<G>; ISO 8573-3 (1999-06)<G>; EN 1005-2+A1 (2008-10)<G>; EN 1005-3+A1 (2008-10)<G>; EN 1127-1 (2019-08)<G>; EN 12021 (2014-04)<G>; EN 13001-2 (2021-03)<G>; EN 13155 (2020-12)<G>; EN ISO 13766-2 (2018-06)<G>; EN 13445-6 (2021-05)<G>; EN ISO 80079-36 (2016-04)<G>; EN IEC 60079-0 (2018-07)<G>; EN 60079-1 (2014-10)<G>; EN 60079-14 (2014-03)<G>; EN IEC 60204-11 (2019-01)<G>; EN IEC 61000-6-2 (2019-02)<G>; EN IEC 61000-6-4 (2019-09)<G>; EN 61511-1 (2017-04)<G>; EN 61511-2 (2017-04)<G>; EN 61511-3 (2017-04)<G>; EN IEC 62061 (2021-07)<G>; EN ISO 13857 (2019-10)<G>; EN ISO 14122-1 (2016-06)<G>; EN ISO 14122-2 (2016-06)<G>; EN ISO 14122-3 (2016-06)<G>; EN ISO 14122-4 (2016-06)<G>; EN ISO 15156-1 (2020-11)<G>; ISO 8573-2 (2018-02)<G>; ISO 8573-4 (2019-02)<G>; EN 286-1 (1998-02); EN 837-1 (1996-12); EN 837-3 (1996-12); EN 1012-1 (2010-09); EN 1514-1 (1997-04); EN 1991-1-1 (2002-04); EN 1991-1-1/AC (2009-03); EN 1991-1-2 (2002-11); EN 1991-1-2/AC (2013-02); EN 1991-1-3 (2003-07); EN 1991-1-3/AC (2009-03); EN 1991-1-4 (2005-04); EN 1991-1-4/AC (2010-01); EN 1991-1-4/A1 (2010-04); EN 1991-1-5 (2003-11); EN 1991-1-5/AC (2009-03); EN 1991-1-6 (2005-06); EN 1991-1-6/AC (2013-02); EN 1991-1-7 (2006-07); EN 1991-1-7/AC (2010-02); EN 1991-2 (2003-09); EN 1991-2/AC (2010-02); EN 1991-3 (2006-07); EN 1991-3/AC (2012-12); EN 1991-4 (2006-05); EN 1991-4/AC (2012-11); EN 1998-1 (2004-12); EN 1998-4 (2006-07); EN 12560-1 (2001-01); EN 12560-2 (2013-09); EN 12560-3 (2001-01); EN 12560-4 (2001-01); EN 12560-5 (2001-01); EN 12560-6 (2003-12); EN 12560-7 (2004-06); EN 12693 (2008-05); EN 13861 (2011-10); EN 60335-2-34 (2013-06); EN 61165 (2006-07); EN 61310-1 (2008-02); EN 61310-3 (2008-02); EN 62502 (2010-11); EN ISO 3266 (2010-05); EN ISO 11688-2 (2000-12); EN ISO 13732-1 (2008-09); EN ISO 13732-3 (2008-09); EN ISO 13849-2 (2012-10); ISO 1217 (2009-07); ISO 3864-1 (2011-04); ISO 3864-4 (2011-03); ISO 4126-9 (2008-04); ISO 5389 (2005-12); ISO 10440-1 (2007-08); ISO 13707 (2000-12); VDMA 4315-5 (2013-02); VDMA 4315-6 (2013-11); VDMA 4315-7 (2013-02); 2006/42/EG (2006-05-17); DIN 4844-2 (2021-11); DIN 25424-2 (1990-04); ANSI/ISA 84.00.01 Part 1 (2004); ANSI/ISA 84.00.01 Part 2 (2004); ANSI/ISA 84.00.01 Part 3 (2004); EN ISO 13854 (2019-09); EN 547-1+A1 (2008-09); EN 614-1+A1 (2009-02); EN ISO 14119 (2013-10); EN 12640 (2019-12); EN ISO 80079-37 (2016-04); EN ISO 19353 (2019-02); EN 60417-1 (2002-04); EN 61078 (2016-11); EN ISO 7010 (2020-03); EN ISO 10439-4 (2015-02); EN ISO 16852 (2016-11); ISA-TR84.00.02 (2022); ISA-TR84.00.02 (2022); ISA-TR84.00.02 (2022); ISA-TR84.00.02 (2022); ISA-TR84.00.02 (2022); ISA-91.00.01 (2001); ISO 7000 (2019-07); ISO 21789 (2022-07); ISO/TR 23849 (2010-05); NACE MR 0103/ISO 17945 (2015); NACE MR 0175/ISO 15156 (2021); VDMA 4315-1 (2022-06)
- Cited in:DVGW G 220 (2021-08)<GLEITEND>; DVGW G 265-3 (2022-12)<GLEITEND>; DVGW G 497 (2019-02)<GLEITEND>
- Identical with:EN 1012-3(2013-11)<IDT>
- Legislation:2006/42/EG (2006-05-17)<H>; Maschinenrichtlinie; 2006/42/EGMitt 2014-04 (2014-04-11); 2006/42/EGMitt 2014-07 (2014-07-11); 2006/42/EGMitt 2015-02 (2015-02-13); 2006/42/EGMitt 2016-01 (2016-01-15); 2006/42/EGMitt 2016-05 (2016-05-13); 2006/42/EGMitt 2016-09 (2016-09-09); 2006/42/EGMitt 2017-06 (2017-06-09); 2006/42/EGMitt 2018-03 (2018-03-09)
- Harmonization info:2006/42/EG (2006-05-17); Maschinenrichtlinie
- Update flag:Unchanged