Full display

show table of content
  • Abstract:
    This European Standard gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations including those for the liquefaction, storage, vaporisation, transfer and handling of LNG. This European Standard is valid for plants with LNG storage at pressure lower than 0,5 bar and capacity above 200t and for the following plant types: - LNG liquefaction installations (plant), between the designated gas inlet boundary limit, and the outlet boundary limit which is usually the ship manifold and/or truck delivery station when applicable; feed gas can be from gas field, associated gas from oil field, piped gas from transportation grid or from renewables. - LNG regasification installations (plant), between the ship manifold and the designated gas outlet boundary limit; - peak-shaving plants, between designated gas inlet and outlet boundary limits - the fix part of LNG bunkering station. The plants with storage capacity between 5 and 200 t are covered by EN 13645. Floating solutions (FPSO, FSRU, SRV), whatever off-shore or nearby shore, are not covered by this European standard even if some concepts, principles or recommendations could be applied. However, in case of berthed FSRU with LNG transfer across the jetty, the following recommendations shall apply for the jetty and topside facilities if the jetty is located within 3000 m from the shore line. In case of FSU type solution, the tank safety functions as defined in clause 6 shall be checked and implemented. The on-shore part is covered by these standard recommendations. excluded from this European Standard.
  • Document number:
    DIN EN 1473
  • Issuing date:
    2016-10-01
  • Document type:
    Norm
  • Title:
    Installation and equipment for liquefied natural gas - Design of onshore installations; German version EN 1473:2016
  • Replaces:
    DIN EN 1473(2007-06); DIN EN 1473(2014-07)
  • Author:
    Gas Technology Standards Committee
  • Search term:
    Acceptance inspection; Charging station; Checks; Climate; Collecting plant; Commissioning; Constructions; Control systems; Corrosion; Definitions; Design; Earth stations; Earthquakes; Environment; Environmental sustainability; Equipment; Erecting (construction operation); Evaporation; Fire; Fire risks; Fire safety; Fittings; Fluidization; Gas circuits; Gas fittings; Gas holders; Gas leanage; Gas technology; Gases; Hazards; Interchange point; Lightning; Lightning protection; Liquefied natural gas; Liquefied petroleum gas; Liquefied petroleum gas installations; Liquid; Liquids; Luminaires; Materials; Natural gas; Natural gas plants; Odorizing; Operation; Painting; Pipelines; Pipes; Piping; Planning; Plant; Pollution control; Pressure; Pumping installation; Pumps; Quality assurance; Safety requirements; Stationary; Storage; Surface spread of flame; Temperature; Testing; Valves; Warning system
  • Application areas:
    15.05 Gasverbrauchseinrichtungen (entspr. EG-Richtlinie); 20.15 Flüssigkeiten (Säuren, Laugen)
  • Hazards:
    AB Terminologische Festlegungen in Normen mit Arbeitsschutzbezug; FA Brand- und Explosionsgefährdungen im Allgemeinen; HB Klima (Temperatur, Feuchtigkeit, Luftströmung, Luftzusammensetzung u. Ä.)
  • ICS:
    75.200 Petroleum products and natural gas handling equipment
  • Price:
    274,40 EUR
  • Cross references:
    EN 14620-1 (2006-09)<S>; EN 809+A1 (2009-10)<G>; EN 1474-3 (2008-12)<G>; EN 1514-1 (1997-04)<G>; EN 1591-1 (2013-12)<G>; EN 1591-4 (2013-08)<G>; EN 1776 (2015-12)<G>; EN 1991-1-2 (2002-11)<G>; EN 1992-1-1 (2004-12)<G>; EN 1992-1-2 (2004-12)<G>; EN 1993-1-1 (2005-05)<G>; EN 1993-1-2 (2005-04)<G>; EN 1994-1-1 (2004-12)<G>; EN 1994-1-2 (2005-08)<G>; EN 1997-1 (2004-11)<G>; EN 1997-1/AC (2009-02)<G>; EN 1997-1/A1 (2013-11)<G>; EN 1997-2 (2007-03)<G>; EN 1997-2/AC (2010-06)<G>; EN 1998-1 (2004-12)<G>; EN 1998-5 (2004-11)<G>; EN 10204 (2004-10)<G>; EN 12065 (1997-09)<G>; EN 12066 (1997-09)<G>; EN 12162+A1 (2009-05)<G>; EN 14620-2 (2006-09)<G>; EN 14620-3 (2006-09)<G>; EN 14620-4 (2006-09)<G>; EN 14620-5 (2006-09)<G>; EN 60079-1 (2014-10)<G>; EN 60079-2 (2014-12)<G>; EN 60079-5 (2015-04)<G>; EN 60079-6 (2015-12)<G>; EN 60079-7 (2015-12)<G>; EN 60079-10-2 (2015-03)<G>; EN 60079-11 (2012-01)<G>; EN 60079-14 (2014-03)<G>; EN 60079-17 (2014-03)<G>; EN 60079-18 (2015-04)<G>; EN 60079-25 (2010-10)<G>; EN 60079-26 (2015-01)<G>; EN 61508-1 (2010-05)<G>; EN 62305-1 (2011-02)<G>; EN 62305-2 (2012-05)<G>; EN 62305-3 (2011-03)<G>; EN 62305-4 (2011-02)<G>; EN ISO 1461 (2009-05)<G>; EN ISO 9712 (2012-06)<G>; EN ISO 10456 (2007-12)<G>; EN ISO 10497 (2010-02)<G>; EN ISO 13709 (2009-12)<G>; EN ISO 16903 (2015-06)<G>; EN ISO 17636-1 (2013-01)<G>; EN ISO 17636-2 (2013-01)<G>; EN ISO 28460 (2010-12)<G>; HD 60364-5-54 (2011-07)<G>; IEC/TR 60079-16 (1990-04)<G>; EN 1092-1 (2018-04)<G>; EN 1127-1 (2019-08)<G>; EN 1474-2 (2020-09)<G>; CEN/TR 1591-2 (2020-03)<G>; EN 12308 (1998-06)<G>; EN ISO 21012 (2018-12)<G>; EN ISO 28921-2 (2017-02)<G>; EN 13445-1 (2021-05)<G>; EN 13445-1 (2021-05)<G>; EN 13445-2 (2021-05)<G>; EN 13445-3 (2021-05)<G>; EN 13445-3 (2021-05)<G>; EN 13445-4 (2021-05)<G>; EN 13445-5 (2021-05)<G>; EN 13445-6 (2021-05)<G>; EN 13445-6 (2021-05)<G>; EN 13445-8 (2021-05)<G>; EN 13445-8 (2021-05)<G>; EN 13445-10 (2021-05)<G>; EN 13480-1 (2017-06)<G>; EN 13480-2 (2017-06)<G>; EN 13480-2 (2017-06)<G>; EN 13480-3 (2017-06)<G>; EN 13480-4 (2017-06)<G>; EN 13480-4 (2017-06)<G>; EN 13480-4 (2017-06)<G>; EN 13480-5 (2017-06)<G>; EN 13480-5 (2017-06)<G>; EN 13480-6 (2017-06)<G>; EN 13480-6 (2017-06)<G>; EN 13480-8 (2017-06)<G>; EN 13480-8 (2017-06)<G>; EN 13480-8 (2017-06)<G>; EN IEC 60079-0 (2018-07)<G>; EN IEC 60079-10-1 (2021-02)<G>; EN 60079-13 (2017-10)<G>; EN IEC 60079-15 (2019-04)<G>; EN IEC 60079-19 (2019-12)<G>; EN ISO/IEC 80079-20-1 (2019-10)<G>; EN 60079-11 (2012-01)<G>; EN ISO 1460 (2020-09)<G>; EN ISO 3452-1 (2021-06)<G>; EN ISO 9606-1 (2017-08)<G>; EN ISO 12944-1 (2017-12)<G>; EN ISO 12944-2 (2017-12)<G>; EN ISO 12944-3 (2017-12)<G>; EN ISO 12944-4 (2017-12)<G>; EN ISO 12944-5 (2019-10)<G>; EN ISO 12944-6 (2018-02)<G>; EN ISO 12944-7 (2017-12)<G>; EN ISO 12944-8 (2017-12)<G>; EN ISO 15607 (2019-10)<G>; EN ISO 15609-1 (2019-10)<G>; EN ISO 15614-1 (2017-06)<G>; EN ISO 17637 (2016-12)<G>; EN ISO 17640 (2018-11)<G>; API RP 2218 (2013-07); BS 5970 (2012-09-30); BS 6349-1-1 (2013-09-30); BS 6349-1-2+A1 (2016-06-30); BS 6349-3 (2013-12-31); BS 6349-4 (2014-06-30); BS 6349-7 (1991-11-29); BS 6349-8 (2007-04-30); EN 823 (2013-03); EN 1759-1 (2004-11); EN 12483 (1999-05); EN 12560-1 (2001-01); EN 12560-2 (2013-09); EN 12560-3 (2001-01); EN 12560-4 (2001-01); EN 12560-5 (2001-01); EN 12560-6 (2003-12); EN 13645 (2001-12); EN 60529 (1991-10); EN 61508-2 (2010-05); EN 61508-3 (2010-05); EN 61508-4 (2010-05); EN 61508-5 (2010-05); EN 61508-6 (2010-05); EN 61508-7 (2010-05); EN 61800-4 (2003-01); EN 61800-5-1 (2007-09); EN 61800-7-1 (2016-02); EN 61800-7-201 (2016-02); EN 61800-7-202 (2016-02); EN 61800-7-203 (2016-02); EN 61800-7-204 (2016-02); EN 61800-7-301 (2016-02); EN 61800-7-302 (2016-02); EN 61800-7-303 (2016-02); EN 61800-7-304 (2016-02); EN ISO 5199 (2002-03); EN ISO 9906 (2012-05); EN ISO 12100 (2010-11); EN ISO 12241 (2008-06); IEC 60364-1 (2005-11); IEC 60364-1 Corrigendum 1 (2009-08); IEC 60364-4-41 (2005-12); IEC 60364-4-42 (2010-05); IEC 60364-4-42 AMD 1 (2014-11); IEC 60364-4-42 Edition 3.1 (2014-11); IEC 60364-4-43 (2008-08); IEC 60364-4-43 Corrigendum 1 (2008-10); IEC 60364-4-44 (2007-08); IEC 60364-4-44 Corrigendum 1 (2010-05); IEC 60364-4-44 Corrigendum 2 (2011-10); IEC 60364-4-44 AMD 1 (2015-09); IEC 60364-4-44 Edition 2.1 (2015-09); IEC 60364-5-51 (2005-04); IEC 60364-5-52 (2009-10); IEC 60364-5-52 Corrigendum 1 (2011-02); IEC 60364-5-54 (2011-03); IEC 60364-5-55 (2011-12); IEC 60364-5-55 AMD 1 (2012-10); IEC 60364-5-55 AMD 2 (2016-07); IEC 60364-5-55 Edition 2.1 (2012-10); IEC 60364-5-55 Edition 2.2 (2016-07); IEC 60364-6 (2016-04); IEC 60364-7-702 (2010-05); IEC 60364-7-703 (2004-10); IEC 60364-7-705 (2006-07); IEC 60364-7-706 (2005-10); IEC 60364-7-709 (2007-05); IEC 60364-7-709 AMD 1 (2012-02); IEC 60364-7-709 Edition 2.1 (2012-03); IEC 60364-7-713 (2013-02); IEC 60364-7-714 (2011-12); IEC 60364-7-715 (2011-12); IEC 60364-7-717 (2009-07); IEC 60364-7-718 (2011-03); IEC 60364-7-729 (2007-07); IEC 60364-7-740 (2000-10); IEC 60364-7-753 (2014-05); ISO 15664 (2001-05); ISO/TS 16901 (2015-03); API STD 520 PT II (2020-10); API STD 520 PT I (2020-10); API STD 520 PT II (2020-10); BS 1722-10 (2019-04-26); BS 6349-1-4 (2021-07-30); BS 6349-1-3 (2021-04-27); BS 6349-1-4 (2021-07-30); BS 6349-2 (2019-06-26); BS 6349-5 (2016-12-31); PD CLC/TR 50427 (2006-04-28); EN 13766+A1 (2020-05); EN IEC 60034-5 (2020-06); EN 60079-29-1 (2016-12); EN IEC 61800-1 (2021-02); EN IEC 61800-2 (2021-04); EN IEC 61800-3 (2018-09); EN IEC 61800-3 (2018-09); EN 61800-5-2 (2017-04); IEC 60364-5-53 (2019-02); IEC 60364-5-53 (2019-02); IEC 60364-5-53 (2019-02); IEC 60364-5-53 (2019-02); IEC 60364-5-53 (2019-02); IEC 60364-5-56 (2018-11); IEC 60364-7-701 (2019-10); IEC 60364-7-704 (2017-03); IEC 60364-7-708 (2017-04); IEC 60364-7-710 (2021-05); IEC 60364-7-711 (2018-03); IEC 60364-7-712 (2017-04); IEC 60364-7-721 (2017-06); IEC 60364-7-722 (2018-09); IEC 60364-8-1 (2019-02); VDI 2055 Blatt 3 (2011-10)
  • Cited in:
    DIN 30690-1 (2019-05)<GLEITEND>; DIN 86209-1 (2017-02)<GLEITEND>; DIN 86209-2 (2019-08)<GLEITEND>; TRBS 3151 (2019-09)<STARR>; TRGS 751 (2019-09)<STARR>
  • Identical with:
    EN 1473(2016-05)<IDT>
  • Update flag:
    Withdrawn